This annex lists those clauses that have been changed from IEEE Std 1076-1987during its revision. The clause numbers are from IEEE Std 1076-1987; where a new clause has been added, it is described as being added between or after existing clauses from IEEE Std 1076-1987.
Section 1: 1.1 , 1.1.1 , 1.1.1.1 , 1.1.1.2 , 1.1.2 , 1.1.3 , 1.2 , 1.2.1 , 1.2.2 , 1.3 , 1.3.1 , and 1.3.2 .
Section 2: 2.1 , 2.1.1 , 2.1.1.1 , 2.1.1.2 , 2.2 , 2.3 , 2.3.1 , 2.4 , 2.5 , 2.6 , and 2.7 . In addition, the following new clauses have been added: 2.1.1.3 ,describing file parameters, has been added after 2.1.1.2 ; and 2.3.2 , describing signatures, has been added after 2.3.1 .
Section 3: Introduction, 3.1 , 3.1.1 , 3.1.1.1 , 3.1.3 , 3.1.3.1 , 3.1.4 , 3.1.4.1 , 3.2.1 , 3.2.1.1 , 3.2.2 , 3.3 , 3.3.1 , and 3.4.1 .
Section 4: Introduction, 4.1 , 4.2 , 4.3 , 4.3.1 , 4.3.1.1 , 4.3.1.2 , 4.3.1.3 , 4.3.2 , 4.3.3 , 4.3.3.1 , 4.3.3.2 , 4.3.4 , 4.4 , and 4.5 . In addition, two new clauses, describing group template declarations and group declarations,have been added at the end of this chapter.
Section 5: Introduction, 5.1 , 5.2 , 5.2.1 , 5.2.1.1 , 5.2.1.2 , 5.2.2 , and 5.3 .
Section 6: 6.1 , 6.2 , 6.3 , 6.4 , 6.5 , and 6.6 .
Section 7: 7.1 , 7.2 , 7.2.1 , 7.2.2 , 7.2.3 , 7.2.4 , 7.3.1 , 7.3.2 , 7.3.2.1 , 7.3.2.2 , 7.3.3 , 7.3.5 , 7.3.6 , 7.4 , and 7.5 . Additionally, a new clause describing the shift operators has been added between 7.2.1 and 7.2.2 , and anew clause describing the sign operators has been added between 7.2.3 and 7.2.4 .
Section 8: Introduction, 8.1 , 8.2 , 8.3 , 8.3.1 , 8.4 , 8.4.1 , 8.5 , 8.6 , 8.7 , 8.8 , 8.9 , 8.10 , 8.11 , and 8.12 . Additionally, a new clause describing the report statement has been added between 8.2 and 8.3 .
Section 9: Introduction, 9.1 , 9.2 , 9.3 , 9.4 , 9.5 , 9.5.1 , 9.5.2 , 9.6 , 9.6.1 , and 9.7 . In addition, a new clause describing the instantiation of a design entity has been added between 9.6.1 and 9.7 .
Section 10: 10.1 , 10.2 , 10.3 , 10.4 , and 10.5 .
Section 11: 11.2 , 11.3 , and 11.4 .
Section 12: Introduction, 12.1 , 12.2 , 12.2.1 , 12.2.2 , 12.2.4 , 12.3 , 12.3.1 , 12.3.1.2 , 12.3.1.3 , 12.3.1.4 , 12.3.1.5 , 12.3.2.1 , 12.4 , 12.4.1 , 12.4.2 , 12.4.3 , 12.6.1 , 12.6.2 , and 12.6.3 .
Section 13: 13.1 , 13.3 , 13.4.2 , 13.5 , and 13.9 . In addition, two new clauses describing basic and extended identifiers have been added between 13.3 and 13.4 .
Section 14: 14.1 , 14.2 , and 14.3 .